If the horse mouth iron box printing appears anti-sticky problem how to solve?

* 来源: Good Torch Enterprise Corp. * 作者: twa133 * 发表时间: 2018/12/27 13:24:11 * 浏览: 275

If the horse mouth iron box printing appears anti-sticky problem how to solve?The first thing to

know is why this problem occurs:

1, the drying is not sufficient, the residual solvent is many.In particular, the printing plate is deeper

and the use of slow-drying solvents in the case.

2, Horse mouth iron box printing after drying film cooling is not sufficient, or the pressure when

the winding is too large.

3, gloss, silver ink printing, easy to appear inadequate drying phenomenon, resulting in sticky ink.

Solution to the problem of anti-viscosity in the printing of horse mouth iron box

1. Keep the drying system in optimal condition, dry temperature, air volume, wind speed is

appropriate, and match the printing speed, fully reduce residual solvents.

2, check whether the cooling system is in good working condition, so that the film rewinding when

fully cooled.The winding tension and winding pressure should be appropriate and, if necessary,

reduce the number of rice collected.

3, gloss, silver ink printing to reduce the printing speed, full drying